Bumpers? But not sure...

meriberi_00

Jr Member
17A56D0C-E52E-42D5-8F0E-80BABFC38653.webp CE23CD61-36D2-4058-AB18-F88AB186FB66.webp I’m wondering if I need to put bumpers on her posts(again)? The top 1/3 of her ear likes to curve inward...this picture doesn’t give a clear idea. The bell of her ear seems pretty steady, while just that top third is wobbly. What do you guys think?
 
Mine did the same thing. Lasted about 5 days then today BAM, big flop with one. Immediately back with the zip tie method on both. Going to post thru Christmas and check again.
 
I would post a round with bumpers and then evaluate when you repost. If pockets start then use them. You will find that if you make sure you really pull up on the ears and push the post in the ear when you adhere the ear to the post that you can avoid bumpers completely. Pockets are caused by improper posting, mainly not pulling up enough on the ear when you post
 
Mine did the same thing. Lasted about 5 days then today BAM, big flop with one. Immediately back with the zip tie method on both. Going to post thru Christmas and check again.
Be careful using Ziptie method as it can cause a weak mid to tip. If you are getting pockets I would not post with Zipties. They are meant to build the base and do little for mid to upper ear
 
I would post a round with bumpers and then evaluate when you repost. If pockets start then use them. You will find that if you make sure you really pull up on the ears and push the post in the ear when you adhere the ear to the post that you can avoid bumpers completely. Pockets are caused by improper posting, mainly not pulling up enough on the ear when you post
Thank you! I’m not 100% sure that it’s even pockets really. Can you tell from my pics? I was thinking maybe it was just the way it was cropped? Her ears look “curvy” to me.
 
Can you post a couple more pics? The black fur at the base by the forehead give a curved illusion from what I’m seeing. I know they move around so much that it’s tough to get a pic. I used to have my kids hold a treat over my head so that I could get a straight on pic.
 
Nope, there are no pockets. What you are seeing is the ear pulling down from lack of pulling up. Make sure you pull up on the ear like I said above or pockets will ensue. This is why I advised posting a round with bumpers bc if not I’m afraid they will start up again

Also, the top third of the ear curving in is caused by two wide of posting material. It can be corrected by using 1/2” backer rod. If after a few rounds of posting with that size doesn’t correct that, post with 3/8”. The ear needs a narrower post than the 5/8” backer rod so the ear can have something to shape around. 5/8” is too wide of a diameter for narrower crops. This is also why Zipties fail a lot. They are too flat and don’t provide an adequate mold for the ear to curve around, which is what is necessary. Crops with a wider bell to mid ear are thr only ones I’d advise using 5/8” on.
 
17624229-94D4-48B1-90EE-9F315B8D325C.webp CEA1F74D-1CBA-48D6-BE26-303C9A757744.webp CEA1F74D-1CBA-48D6-BE26-303C9A757744.webp 9B84DDB4-DFE4-41DA-A163-C89D9326FCD2.webp 4806DD91-DC3A-4F5D-AFEB-FD4A76169B57.webp
Nope, there are no pockets. What you are seeing is the ear pulling down from lack of pulling up. Make sure you pull up on the ear like I said above or pockets will ensue. This is why I advised posting a round with bumpers bc if not I’m afraid they will start up again

Also, the top third of the ear curving in is caused by two wide of posting material. It can be corrected by using 1/2” backer rod. If after a few rounds of posting with that size doesn’t correct that, post with 3/8”. The ear needs a narrower post than the 5/8” backer rod so the ear can have something to shape around. 5/8” is too wide of a diameter for narrower crops. This is also why Zipties fail a lot. They are too flat and don’t provide an adequate mold for the ear to curve around, which is what is necessary. Crops with a wider bell to mid ear are thr only ones I’d advise using 5/8” on.
I’m assuming you were replying to me? I use 1/2 in backer rod and I do pull the ear up as far as it will go.
 
View attachment 90768 View attachment 90765 View attachment 90765 View attachment 90766 View attachment 90767
I’m assuming you were replying to me? I use 1/2 in backer rod and I do pull the ear up as far as it will go.
Yes. Ok, good. Since you are using 1/2” I would switch to 3/8” if the upper part of the ear continues to curve in.

A majority of my post was generalized towards everyone though. Many people post with 5/8” backer rod and for most dogs it is just too big.

They are looking good.
 
Thank you @Archer ! When I first went to the store to buy the backer rod, I noticed that there was no way that the 5/8 would work for her small ears. I will definitely try the 3/8ths! Thank you again for your advice!:):thumbsup2:
 
Wow, they sure are small puppies for too short a period, but she is looking great! Seems to be treating her toys with care as well.
Yes, it seems they grow up way too fast! Her toys are just now starting to lose their integrity and need to be replaced...I thought it would be a lot sooner!:wacky:
 

Back
Top