Ear Posting Soon

If they're popping out or not looking straight they're not being pushed in far enough. You don't have to worry about going too far because you can't with their ear design. Just push them down until they won't go anymore and stretch the ear up as you're doing it.
Inserting post close.webp
 
Trust me, I wasn't worried about them going to far. I've wiggled twisted and pushed in every direction to get them down as far as I can. And most of them time she manages to pull the bottom untaped portion from out of her ear hole so it's free hanging.
 
The tape you are using (durapore from the look of it) is not sufficient enough for posting a Doberman's ears, which is why we don't recommend it. J&J Zonas or Kendall Curity is the best.

To me it sounds like you might not be pulling up on the ear enough when you post. This is an important aspect of posting. Even if you have the backer rod solidly and deep in the ear, if it is not pulled up on properly and taped with a good strong tape, the base if your post will always come out. Pulling up on the ear and taping firmly at the tip (without cutting off circulation) will keep the post rooted inside the ear and stabilize it.

I also use Torbot adhesive on the tips of the ears to give them that extra hold. Also because right now my puppy's ears are solid minus one tip ;)
 
....also, in the picture you posted the bottom portion of the taping job looks loose to me. It might just be the way you did the bridge, though. Over all it looks like you used a lot of tape You want minimal tape with a firm hold for best results.
 
How did I miss the replies...hmm..



I have a feeling my dogs ears are going to come out looking like s***. Even when I get them on what seems to be good, she makes it her life mission to try and take them off, until she succeeds...rubbing on objects, scratching, shaking. Really frustrating after spending so much time trying to get her to stay still and tape them right. When I took them off to redo on ear looked good and one looked all twisted and crappy. I'm afraid of wrapping tighter and cutting off circulation.

**** this dog while typing this message I re taped twice as secure as I can only to have her tear them off instantly after spending more type when I have **** to do. She can look retarded screw this.
 
Tried to take a few breathes calm down and edit that but it passed the time limit.....

How can you make it impossible for them to tear off.... Even when I think i've got them bomb proof....look at that they're off again...
 
Have you tried to Torbot adhesive? That pretty much make them bomb proof and you can get by with much less tape that way. I wish someone lived close enough to help you the first couple times.
 
Whoops missed that tip. Does it cover the whole rod like glue? I think I found the issue is, like someone already said.

The rod isn't seating all the way. I'm twisting pushing sliding as much as I can, in every direction. A lot. This last redo I had one seem to go furthe and keep the ear much straighter. I felt with my finger how deep it goes to measure. The rod doesn't seem stiff enough to push down. It just squishes. Can I absolutely not reinforce the part that goes inside with tape?


Also, how long can they stay untapped without messing up the ear? What about a bad job like the natural fold is creased? I'd like to know how important having it perfect or messed up for how long effects it in case I am unable to fix or redo at some point.

Thanks.
 
Whoops missed that tip. Does it cover the whole rod like glue? I think I found the issue is, like someone already said.

The rod isn't seating all the way. I'm twisting pushing sliding as much as I can, in every direction. A lot. This last redo I had one seem to go furthe and keep the ear much straighter. I felt with my finger how deep it goes to measure. The rod doesn't seem stiff enough to push down. It just squishes. Can I absolutely not reinforce the part that goes inside with tape?


Also, how long can they stay untapped without messing up the ear? What about a bad job like the natural fold is creased? I'd like to know how important having it perfect or messed up for how long effects it in case I am unable to fix or redo at some point.

Thanks.
imho having a badly taped ear is as bad as not having the ears taped at all. You want to have that consistent and constant firm straight hold. Very important for good ears. At this stage you do not want them to go long before you repost. Take off the posts, clean out the ear, make your new posts while they dry, then repost immediately. Do not let them be down for long. We are talking minutes here.

You say the rod is squishy? are you using duct tape on them? I double wrap my posts in duct tape. Seems to make them pretty sturdy. If you are back taping, this on top of the duct tape should be enough to make the posts sturdy. Also when I back tape I wrap them twice. Adds to the strength.

The natural fold should be creased toward the head. Do you mean when it is not creased when you post? It is pretty important to have them sturdy imho. I don't know what your definition of messed up is, but if there is any bend to the ear at all, you need to redo them right away. If the tape is too tight, you need to redo them right away. If the natural crease is not folded in, redo them right away.

Like stated in my posting thread. I am a bit OCD about ear posting and am pretty damn picky about it. If I don't like the posting I did, I redo it no matter the reason (silly or not)

I second what Jan said about the Torbot. Aria has a very long crop and it has helped the tips to stay up better than anything else, including back taping and using nail glue. The Torbot goes on the inside of the ear where the post sits. DO NOT put it in the ear canal. I only use it on the flap. Then you also put it on the post where the ear will touch it. You bond the glue on the ear to the glue on the post. You have to use medical adhesive remover if you use the Torbot. It's messier that the back taping, but you get a better hold

Maybe start a picture thread of your posting progress so we can help you along. It seems like a PITA in the beginning, but once you get the hang of it, and your puppy used to having it done it becomes a breeze. Make it fun for her. Lots of love, treats and praise.
 
Sounds like I need to do everything right away, haha....

Yes I am using duct tape, but the video said leave the part that goes into the ear internally untaped? I use a couple layers of duct tape on most of the rod for strength...

I guess i'll start a picture thread.
 
Sounds like I need to do everything right away, haha....

Yes I am using duct tape, but the video said leave the part that goes into the ear internally untaped? I use a couple layers of duct tape on most of the rod for strength...

I guess i'll start a picture thread.
Hahaha, yes :)

Yes, that's correct. You want to leave the end untaped. I only leave the very tip of the backer rod untaped, about 1/2 inch.

Keep your head up. Like I said, it seems sooooo frustrating when you first get started, but you can do this. It gets easier.
 
That's where i'm having the problem I think. Getting the squishy soft untaped end down in without it bending.

It's frustrating because I don't have time to fix it right away some times. And if it's that important that only MINUTES go by i'm screwed. :( Especially if I manage to get some time to redo it and she pulls it out right away.
 
That's where i'm having the problem I think. Getting the squishy soft untaped end down in without it bending.

It's frustrating because I don't have time to fix it right away some times. And if it's that important that only MINUTES go by i'm screwed. :( Especially if I manage to get some time to redo it and she pulls it out right away.
Well, I say minutes and I mean about 15 or so. It's not like you have to drop all that you are doing and jump on it. Until they are pretty sturdy, I wouldn't let them go longer that 15 minutes or you can back peddle and lose the time you spent posting.

The early on posting sucks! It gets better.
 

Back
Top