Ear Molding prototype, Success!!

after perfecting the prototype, would you use it on your puppy after she has had her ears cropped?

  • Yes!

    Votes: 7 77.8%
  • No!

    Votes: 0 0.0%
  • maybe, i'm not sure

    Votes: 2 22.2%

  • Total voters
    9
The things I'd look for, in order of importance (highest to least) would be:

1. Safe
2. Comfortable
3. Effective (secure & adjustable would be part of this)
4. Convenient/foolproof to use
5. Inexpensive

If molds met those criteria, and the first three are a must, I could see using them over an ad hoc method. If I had had a readily-available option for posting when Kira was the right age for cropping, one that met the convenience bit, I probably would've gone ahead and done it, but most of the usual posting methods seemed a bit much for a novice with many other Older Doggy difficulties to deal with.
 
I completely agree. I feel if you're gonna own a cropped dog then it's your responsibility to see it through and make sure they turn out correctly. I would not let my dogs ears go down with out a fight!:guns:

I have just seen to many beautiful crops, with a bad posting job. To me it's not that difficult and im doing two, lol! I think if your going to make your pup go through with the surgery make sure it wasn't for nothing.

It can also be genetic.. Every red female in my first litter has a crop and none of their ears stand.. Including my own Demi.
 
First off, i still don't have the pics because i'm taking them today when i get to my vet's clinic and show you all how easy it is to put on.
The mold is based on different already used solutions. With my great dane y used the halo, and it worked beautifully, the only problem was he would bend the rods and the part under his chin would irritate his skin a little, so i'd have to be taking it off every few days. I've used to the cup with another great dane (long time ago) and even though it's easy to put on, i had HUGE problems using it. Counting back, i've molded the ears of 6 great danes, so i've seen the pros and cons of a lot of different solutions there are for this. Getting all the info of these past experiences i put together a simple way to do it. the top part is like that of a halo but using materials that can withstand a lot more movement and the pups playfulness, i also had to take in account that this is going to be used and put on the pup before he/she wakes up form the surgery so it has to be ventilated. the bottom part or the base of the mold (the part that hold it to the pups head) had to let the skin breath and be comfortable so the dog's skin won't get irritated or he/she won't get annoyed or impatient about wearing it. So the bottom part is made of leather with a soft hairy like material on the bottom (lol, don't know the name of it in english)
The ears do go taped onto the structure, but it's a lot easier to put on than most solutions i've found. And i also use a special tape that is full with small holes to allow ventilation of the skin.
i have not taken this design lightly, i know how important our pups are to us and i know the end results that are needed.
The end results i am looking for is not so much the speed at which the mold has to make the ears stand up, but to make it easier to put on, to clean the wounds after the surgery, and also for the dog to be comfy. trying to make it easier for the owner, vet and dog.
This is marketed for my vet's clinic and his patients and the association down here in Guatemala. This prototype will most likely be used for show dogs which means it'll be a show crop. These are people that will most likely be able to spend more on their dogs, but for now i still don't have a price on how much it will cost.
One of the top people at the association has seen the process of how i've done it with Tsuki, and she's been really supportive and is happy with the results, giving me the thumbs up for the use of it on more dogs once we get it done formally.
This mold is to be used from start to end.
Give me a bit and i will post the pics and you guys can see it. It's a simple thing, it's not this huge elaborate piece and it doesn't look like a completely out of this world mold. It's clean and i've put in account the molds that are already out there and with all that it came down to the one i made.
if there's any other questions don't hesitate to ask. :)

(sorry for the small grammar errors, english is not my first language)
 
Since the ears continue to grow I would be interested t see how it adapts with the growth and stil maintains the ears in the correct posiion. The "fur base " is a concern if it stays on the ear from start to finish - How do you keep it clean??

I am all for a simple method that works, keeps the ears clean and open and you don't have to redo. Which brings up another point - How do you keep it on for 3 months withouth the tape and glue coming off???

I will wait to see pictures and diagrams. I have tried every method out there including the rack by HOH./ Never will I do that again - 12 puppies had them off by the time we got home for the vet and they are very chinzy on the glue they send so you had better order your own extra. I am surprise that they did not rip an ear off. I hated that simple little device.
 
Since the ears continue to grow I would be interested t see how it adapts with the growth and still maintains the ears in the correct position. The "fur base " is a concern if it stays on the ear from start to finish - How do you keep it clean??
I too, am curious about these points. I didn't even address these with my first post.
 
Hey guys, sorry I took a LOT longer than I had said, I actually had to ask the faculty for permission to put pictures of the mold online since it's still in process of prototype, and they took forever to answer back. But here are the pictures i had promised. The product is still in process so obviously it doesn't look as pretty or appealing as it should be, but it works. It is made to be suited for puppies from 10 weeks to 3 months.
We have actually now molded the ears of 2 other dobbies, one where the other accepted to used the prototype and one where the owner wanted to use the halo. The differences were remarkable! Sadly the one using the Halo had infections and still hasn't raised his ears, they are having a lot of issues, but the other puppy that used this, is great and her ears are already up!

It is really simple to put on, and you don't have to be taking it off too often, so it doesn't irritates the skin.
Screen shot 2012-07-12 at 12.52.47 PM.webpScreen shot 2012-07-12 at 12.53.30 PM.webp

You just put in on your dog, kind of like a normal collar (obviously not is the same place right! lol)
and the dog gets used to it a LOT faster than a halo or the tubes that go inside the dog's ears.

Screen shot 2012-07-12 at 12.54.12 PM.webp Screen shot 2012-07-12 at 12.54.30 PM.webp The adhesive that the vet uses is special, because it is full of small little incisions so it lets the skin breath. Ventilation is KEY.

Screen shot 2012-07-12 at 12.54.44 PM.webp

Well there you go... it still need a bit of tweaking but that's the mold. Productive criticism is of course welcomed, and sorry again for taking so long, but better late than never.
 
Does it allow the pup to use his/her ear muscles? I imagine it's important for them to keep those muscles strong as the new ear position solidifies, so that later, he/she can achieve an alert expression, or a softer layback. I've seen some dobes who literally cannot lay their ears back, because they were posted so strictly for so long. They had beautiful ears, and a lovely crop, but no mobility in the ear. I think that's why a lot of people suggest removing the "bridge" from between the posts after a while. Just curious as to how your device addresses that.

I really like the concept. And it's not unattractive to look at. Also, it keeps the pup from sleeping on his ears, a big problem we've had with Dylan. That right ear is still "lazy" because he sleeps so hard on it, and always has. Anyway, I'm intrigued by this. It will be a very, very long time before we're posting any ears around here, but I find your device very interesting. Nice work!
 
I really like the concept! I like the fact that the straps appear to have nice fuzzy cushion for comfort also.
Only questions I have is... are they pre-made or made to order? Not all pup's heads are the same width and not each set of ears are the same lenght!
 
It looks really nice and I think you'll be able to sell quite a few after word gets out!

DDD, Albert is the same and sleeps hard on his left ear all the time so that one has been a struggle too.
 
Does it allow the pup to use his/her ear muscles? I imagine it's important for them to keep those muscles strong as the new ear position solidifies, so that later, he/she can achieve an alert expression, or a softer layback. I've seen some dobes who literally cannot lay their ears back, because they were posted so strictly for so long. They had beautiful ears, and a lovely crop, but no mobility in the ear. I think that's why a lot of people suggest removing the "bridge" from between the posts after a while. Just curious as to how your device addresses that.

I really like the concept. And it's not unattractive to look at. Also, it keeps the pup from sleeping on his ears, a big problem we've had with Dylan. That right ear is still "lazy" because he sleeps so hard on it, and always has. Anyway, I'm intrigued by this. It will be a very, very long time before we're posting any ears around here, but I find your device very interesting. Nice work!

Good Question! actually it lets them use their muscles perfectly, that was actually a comment one of the vets i'm working with said, the pups we've used the mold on have had great results in movement as well, I remember seeing my Tsuki move the base of her ears with the mold on, so it's not an issue. :)

Panama, about your question, this mold is made for pups from 10 weeks -4 months old. So all the measurements are in the 95 percentile, which means it fits from big pups to small ones but obviously made for pups. We've tried it on many dobbies and for now the size seems to fit all. Also the ear part is made for an exhibition cut, (those are my clients) but it will fit a medium cut as well since it doesn't matter if there's space between the ear and the wire. This is not a mold for ear correction (adult dobermans who still have a 'lazy' ear)

anyway, hope that answers your questions! don't hesitate to ask! It'll help me! :)

oh, and pleasse! if you guys could answer the question on the discussion it would help me a lot and tell your friends plzz! ^.^ thnx!!
 
It does look like it would work and I certainly see things I like - but I would like to see the finished ears as from the fist picture you posted I saw pockets forming and the ears tilting in. Not all ears stand after a month - some have to be posted longer and my concern would still be that as the puppy grows it would cause the ears to tepee over the head if you had to post longer. I hope you are on the right track however as it could be used over again which would be very appealing to breeders especially.
 
I like these but I agree with D4E, the ears seem to be turning out, and creating a pocket.

If you were to bend the wires inward maybe a 1/4" I would imagine this would allow the ears to stand perfectly straight.

I would love to hear an update, and perhaps see pictures from the finished posting job.
This is a great idea for people not wanting to mess with posting.

Hannah_87
 
I actually tried this method with Albert that I made myself and he had them off within 5 minutes and didn't like them at all compared to the other posting methods I've used. Not saying that it won't work on some dogs, but it didn't work for us at all. :)
 
I think if a breeder ordered these by the dozen (the price wold have to be right) A puppy could and would get used to wearing this early on, But i believe this to be like the Racks i make.. At a certain age there is nothing you can do to keep it on, short of a welder. ;)

I do like the idea and would be very interested in an update though and id seriously consider ordering a cpl to try out.. But then i admit it would take a lot to move me away from using racks because i can make them myself for next to nothing although time consuming to make they do work and work well.
Capture_07232013_030527.webp
 
Last edited by a moderator:

Back
Top