Paracord Collars

It appears that "mousing" also requires drilling a hole into the fastener to install in order to prevent loosening from vibration. I don't think that A) drilling a hole would be good for the integrity for these fasteners. B) a dog would be vibrated enough to loosen the pin
I believe I see a "mousing" hole in the end of the pin in the second picture in this thread. It's probably just there because the holes are traditional in that type of shackle. I also saw the holes in all the Kloud hardware I saw for sale this morning online when I was looking on my own. I just don't trust any screws to not come unthreaded and even use Loc-Tite thread lock liquid on all my screw-back conchos. Maybe I'm just anal ;)
 
I think they look wonderful! I wonder if they would hold up to those holy terrors of mine? :D

If it can hold up to my terror of a doberteen, I think you're safe! Seriously, she's a nutball and she death shakes the crap out of her toys basically all day. I wonder how she never gets dizzy! This is more of how she shakes her toys (other than her big basketball) everyday with her collars on:
 
I believe I see a "mousing" hole in the end of the pin in the second picture in this thread. It's probably just there because the holes are traditional in that type of shackle. I also saw the holes in all the Kloud hardware I saw for sale this morning online when I was looking on my own. I just don't trust any screws to not come unthreaded and even use Loc-Tite thread lock liquid on all my screw-back conchos. Maybe I'm just anal ;)
The hole you see is at the beginning of the pin
ImageUploadedByTapatalk1373004316.294319.webp


This is used to attach a wire or string to the pin and the shackle so as not to lose the pin when removed from the shackle.

It CAN also be used to stop a pin from "vibrating" loose when used on a piece of machinery known to vibrate. An example would be helicopters, yachts, and airplanes. Which to me speaks volumes as to the strength and integrity of this type of hardware.

There are some adjuster bars that are inferior. As a matter of fact I have a drawer full of some that I didn't like the quality of once I got them. They are made out of an alloy, similar to what conchos are made of. I refuse to use them even though they were cheaper.

It takes seven complete turns to unscrew it from the shackle. A concho is about three threads. The tensil strength of this type of shackle is like 1800 lbs, I'm not sure what leather is once compromised with a screw, rivet or hole. But I'm thinking its comparable.

Could it come unscrewed, sure. But I'm thinking its as possible as a rivet pulling through leather.


However, thank you for your feedback:
 
I think they look wonderful! I wonder if they would hold up to those holy terrors of mine? :D
As long as they don't weigh more than 440 pounds!

I wouldn't recommend them in dog pulling sports or to tie out. But there aren't many collars that are recommended for that. But it is cord that's rated for 550 pounds and shackles for about that much too.

I use them on my 90 pound boy and have never had a problem.

Golly, I just never thought so much energy would be spent on a stainless steel shackle.
 
Golly, I just never thought so much energy would be spent on a stainless steel shackle.[/quote]

Sorry, but I think you misunderstood me. I am not questioning the supplies you're using, nor the way you create these collars. I was joking about my dogs' inherent ability to destroy just about anything!:D
 
Golly, I just never thought so much energy would be spent on a stainless steel shackle.

Sorry, but I think you misunderstood me. I am not questioning the supplies you're using, nor the way you create these collars. I was joking about my dogs' inherent ability to destroy just about anything!:D
I'm sorry, I shouldn't have quoted you on that. I was generally speaking. I knew what you were talking about and it wasn't challenging me or my supplies. I quite frankly forgot I had quoted you when I typed that.

Me so sorry:)
 
They look pretty cool HM!

As for the shackle,it looks pretty secure to me?
As long as it was snugged down good when installed I would never give it a worry.
Another "test" one can give to find if it's a quality part is a magnet.One shouldn't "stick" to stainless.So if you try to pick a shackle up with a magnet and it sticks its not real stainless.Then and only then would I question the threads coming loose.A quality part will have a nice tight clearance,a shoddy one will usually not.
I think those collars look pretty cool,now,a little too "girlish" for my own taste but cool.:)
Hey HM,how about some real camo(no pink)maybe a desert camo,options are endless to cater to us boyish types.;)
 
They look pretty cool HM!

As for the shackle,it looks pretty secure to me?
As long as it was snugged down good when installed I would never give it a worry.
Another "test" one can give to find if it's a quality part is a magnet.One shouldn't "stick" to stainless.So if you try to pick a shackle up with a magnet and it sticks its not real stainless.Then and only then would I question the threads coming loose.A quality part will have a nice tight clearance,a shoddy one will usually not.
I think those collars look pretty cool,now,a little too "girlish" for my own taste but cool.:)
Hey HM,how about some real camo(no pink)maybe a desert camo,options are endless to cater to us boyish types.;)


Ask and you shall receive!

ImageUploadedByTapatalk1373164050.500999.webp
ImageUploadedByTapatalk1373164067.283342.webp
ImageUploadedByTapatalk1373164114.064765.webp

This is one if the first ones I did for Huck. All brass hardware. The weaving now is much better than when I first started, plus I made a jig so that helps a lot!

Here is another one I did for him.

ImageUploadedByTapatalk1373164616.463431.webp

ImageUploadedByTapatalk1373164637.635981.webp

And the Celtic one is also camo and grey

ImageUploadedByTapatalk1373164671.420445.webp
ImageUploadedByTapatalk1373164686.908309.webp
 
I have more creations!

It's a two inch collar! This one is burnt orange and moss green on brass hardware

null_zps6d1da69b.jpg


null_zps0345ac9d.jpg


null_zpsa736c8f7.jpg


Here is a 25.5 inch collar

null_zps733b6b6a.jpg


null_zpsba710b92.jpg


null_zpsc6d789dd.jpg


Finally here are two special collars I made for two of the Moon transporter's dobermans.

It's a Batman seatbelt buckle!

null_zpsbf63f809.jpg


null_zpsbdbc970e.jpg


Thanks for looking!
 

Back
Top