Prong collar info...?

secuono

Jr Member
What is the proper way of putting prong collars on?
I was told it should be snug, not sagging.
You squeeze one link to take off and on.
But in doing that, the collar easily falls apart now.
Taking one link out, it's too small to slip over the head.
Putting in the original link and it's too big and sags/can invert....
 
Check out Leerburg's website. They have an excellent article regarding everything prong.

There is a fine line in regards to fitting them. You don't want it too loose as that would result in poor (or no) correction. You also don't want it too tight either, ad this would cause constant correction and can desensitize them to the collar. Both of these can result in improperly training your dog.

Dobies are hard to fit prongs correctly due to their short coats and long necks. I let Archer's slide a little past where it should be just because otherwise it's too tight.

On another note, I would not use a prong or any correction collar on a dog younger than 6 mos. I typically will get them used to a martingale collar before progressing to a prong. A martingale is a great transition collar.
 
No, I hope to never have to use it on the new pup. My old boy needed it, he was more stubborn than a mule and pulled to heck without it on. Nothing else ever worked for him.


Yea, that video said to unhook the link. But that is how these dumb collars break and fall apart. I did this with the collar about 6-7 times and after that, it would actually fall away on it's own!! I hate them, they need to make a separate real spring clip somewhere so the prong links are never touched!
 
But that is how these dumb collars break and fall apart. I did this with the collar about 6-7 times and after that, it would actually fall away on it's own!! I hate them, they need to make a separate real spring clip somewhere so the prong links are never touched!
They actually do make them. Amazon.com: Herm Sprenger Neck Tech Training Collar Black 19": Pet Supplies

If the prongs are falling apart I'm guessing it isn't a good quality collar. Many of us use the regular Herm Sprenger 2.25 mm collars that you release a prong to take it off and I've never had a problem unless they're very old and worn out, and in that case I just keep replacement prongs on hand so if one does get worn out (usually where you open it) it can quickly be replaced and like new in no time.
 
They also make a quick release one, but because of the quick release coming off and it being a danger to have a loose dog some trainers stopped recommending them. I would use one if it meant that the collars would stop breaking. I found that the micro prong I used a lot stopped holding in the links tight after about a year of use. I just bought a new one, but now I only stick with Herm Sprenger. You could use a nylon slip collar along with the quick release prong in case it ever came loose, but I have honestly never seen one come loose in all the dogs I have seen with them. I was also told they make a martingale style prong collar. I am not quite sure how it fits, but instead of the chain at the top there is fabric and a release. Maybe that would be worth checking out. I also used the Easy Walk Harness I found at Petsmart and that worked with some success in walking with pulling dogs.

Isn't it funny that a dog can do beautiful heeling in the ring with minimal issues and almost perfect attention, but get them on a walk and they act like you have never taken them to a training session....LOL
 
NVM, the guy himself states that the collars fall apart easily on their own [the regular prong collar]. Guess they knew it fell apart and thus decided to add that you should have it clipped to a regular collar as well.
Idk what brand I bought, but it cost be a good amount. It was always really hard to press the prongs in to remove or attach them, so it wasn't cheap metal. In general, metal doesn't like to be wiggled and bent over and over, leads to weakness and failure.
Oh well.

Thanks all
hope to never need the one I have in storage.
 
I've had the same prongs to use for my dogs for 2 1/2 years and 1 1/2 years one is the thick heavy type and the other is the small light type. We use them often, at least once a week and often many times a week taking them on and off the way you are supposed to by squeezing a link. If the collar is fitted properly, where it is snug against the neck, and is used properly, with only pops of the wrist, it should not just fall off. We went the cheap route and just bought a couple from Petco. Maybe going with a pricier metal isn't the best idea? How old was it when it started just falling off? Was it fitted properly at the time? Just trying to figure out what the problem could have been. That said I agree with the others that you should NEVER put on a prong by slipping it over the head for two reasons, 1) you could injure the dog by scratching them or poking them in the eye, 2) a properly fitted prong would be far too snug to ever be able to slide over the head like that. Btw, it has been some time since I watched it but I was pretty certain the warning on Leerburg's site about them falling off actually referred only to the quick release types.
 

Back
Top